Insights/Product
The four Takeoff steps beside a drone image with every roof edge traced, and the finished roof area diagram totalling 307.69 m²

Introducing Roof Takeoff Reports in ARIS Detect

Accurate measurements. Faster quotes. Smarter inspections.

Updated 4 min read

In the insurance and roofing industry, accuracy and turnaround time can make or break a job. Whether it is assessing storm damage, preparing a quote, or ordering materials, even small measurement errors cost time and money. That is why we have launched the new Roof Takeoff Report inside ARIS Detect: a semi-automated measurement tool that turns your drone or satellite images into accurate, ready-to-quote reports within minutes, not hours.

Takeoff Report
Real Takeoff report from a live ARIS inspection
Download full report (PDF)
A completed Takeoff report, branded, calibrated, and ready to quote.

What It Does

The Takeoff Report gives you precise roof measurements without the manual workload. It helps you:

  • ●Calibrate scale accurately on complex roofs
  • ●Draw and label every ridge, valley, gutter, and flashing
  • ●Apply pitch for true roof surface calculations

Once complete, the data is compiled into a professional, branded PDF ready for quoting, insurance submission, or material ordering.

How It Works

A take-off runs in four steps: set the scale, draw the linework, label every edge, then apply pitch. Each step takes a few clicks, and ARIS does the measuring.

Step 1: Setting Scale

When starting a take-off, you will use two scale tools on the right side of your screen: Ridge Scale and Gutter Scale. Because these parts of the roof sit at different heights, ARIS Detect uses a dual-scale system to achieve superior accuracy.

Adjust the scale using three intuitive controls: the Blue Dot moves the scale, the Green Dot rotates it to match the sheet angle, and the Red Dot adjusts rib spacing.

You can extend the scale for higher precision or enter a custom scale if you know an exact real-world measurement. Once both scales are set, your take-off is perfectly calibrated for measurement.

Step 2: Drawing Linework

On the Draw Edges screen, select Draw and trace the roof perimeter. Then draw gutters, ridges, valleys, and flashings.

Short on time? Press Auto-Detect Edges and ARIS draws the edges for you using AI detection, ready for you to check. Adjust any line with Drag, or clear the canvas with Delete All. Keys 1 to 4 switch between Draw, Drag, Splice and Delete, so your tracing stays quick and clean.

The Draw Edges screen in ARIS Detect Takeoff, with every roof edge traced over drone imagery and the Auto-Detect Edges, Draw, Drag, Splice and Delete tools on the right
The Draw Edges screen. Trace by hand, or let Auto-Detect Edges draw them for you.

Step 3: Labelling Lines

Next, open the Edges Tab and use the Auto Line Labeller. It automatically identifies and labels most lines for you. If anything needs adjusting, simply select the correct label and click on the line to apply it manually.

Takeoff report diagram with every roof edge colour-coded by type and labelled with its length
Labelled edges carry through to the report, colour-coded by type with every length measured.

Step 4: Applying Roof Pitch

Upload an image of the hip in the Faces Tab and use the Pitch Finder to draw a short line across it. The pitch is calculated automatically and can be applied to all faces or entered manually if preferred.

Takeoff report roof area diagram showing the area of every roof face and a total roof area of 307.69 m²
With pitch applied, the report gives the area of every roof face and the total roof area.

Built for the Real World

The Takeoff Report was designed for how professionals actually work.

  • ●Insurance builders can generate accurate, compliant reports faster.
  • ●Roof inspection companies can produce data-backed take-offs from drone captures.
  • ●High-volume insurance claim roof specialists can deliver ready-to-quote documentation minutes after landing.

It saves hours of manual tracing and removes uncertainty from quoting and estimation.

See It on Your Own Roofs

The quickest way to judge a take-off is to read one. Flick through the sample Takeoff report, see the full feature list on the Takeoff product page, or book a demo and we will run a take-off on your own imagery.

The Future of Roof Measurement

This release is only the beginning. ARIS Detect will continue developing deeper automation, integrated materials estimators, and predictive tools for labour and waste forecasting.

We are redefining how roof inspections are done across the insurance and construction industries. Want a guided tour first? Book a demo.

Accurate. Fast. Reliable.

Streamline your roof inspection workflow and experience the future of roof inspections with ARIS Detect.